ARC-1 Industries Phantom One Series Front Bumper - FJ Cruiser (2007-2014)

** If the product is out of stock, expect an 8 - 12 week lead time once ordered. **

Our Phantom One Series Front Bumper represents the most well-designed aftermarket product of this nature for your FJ Cruiser. Each one is proudly designed and built in British Columbia, Canada, and is made of USA supplied A36 Steel. The design process starts with a combination of advanced 3D scanning and hand measuring to ensure dimensional accuracy. Using 3D scans of the vehicle allows us to create not only a well-fitting bumper, but also one that flows with the body lines. Our goal with this product was to create what
should have come on your FJ from factory. Our innovation with this product is beyond skin deep though. The 3/4” tow points are just the tip of the iceberg that are our skeleton plates. These plates act as the main point of load transfer for the entire bumper and connect back to the 3/8” mounting plates with a combination of triple pass welds on the front and plug welds on the back. The loading that this design can take far exceeds the stock mounting plates. To control this, we’ve included reinforcement brackets to transfer excess loading back to the swaybar mounting bolts. A lot of companies view these brackets as optional, but we include at the base level to ensure that every customer has the strongest kit available. The wings include a system of lateral and vertical gussets to resist loading in all directions. They are incredibly rigid when experiencing rock strikes. Loading on the face of the wings allows for some flex to let vehicle glance off a rigid body.

Please Note: The full bullbar & headlight hoop design is still under development. All customers that order hoops will have the option to custom design their own set. Pricing reflects a single center hoop or center hoop with headlight hoops. Customer designs that include parts above or beyond these two options will be subject to requote.

$1,749.99

ARC-1 Industries Phantom One Series Front Bumper - FJ Cruiser (2007-2014) ARC-1 Industries Phantom One Series Front Bumper - FJ Cruiser (2007-2014) ARC-1 Industries Phantom One Series Front Bumper - FJ Cruiser (2007-2014) ARC-1 Industries Phantom One Series Front Bumper - FJ Cruiser (2007-2014) ARC-1 Industries Phantom One Series Front Bumper - FJ Cruiser (2007-2014) ARC-1 Industries Phantom One Series Front Bumper - FJ Cruiser (2007-2014) ARC-1 Industries Phantom One Series Front Bumper - FJ Cruiser (2007-2014)
ARC-1 Industries Phantom One Series Front Bumper - FJ Cruiser (2007-2014) ARC-1 Industries Phantom One Series Front Bumper - FJ Cruiser (2007-2014) ARC-1 Industries Phantom One Series Front Bumper - FJ Cruiser (2007-2014) ARC-1 Industries Phantom One Series Front Bumper - FJ Cruiser (2007-2014) ARC-1 Industries Phantom One Series Front Bumper - FJ Cruiser (2007-2014) ARC-1 Industries Phantom One Series Front Bumper - FJ Cruiser (2007-2014) ARC-1 Industries Phantom One Series Front Bumper - FJ Cruiser (2007-2014)
$1,749.99
Finish
Bullbar Hoops
$1,749.99

** If the product is out of stock, expect an 8 - 12 week lead time once ordered. **

Our Phantom One Series Front Bumper represents the most well-designed aftermarket product of this nature for your FJ Cruiser. Each one is proudly designed and built in British Columbia, Canada, and is made of USA supplied A36 Steel. The design process starts with a combination of advanced 3D scanning and hand measuring to ensure dimensional accuracy. Using 3D scans of the vehicle allows us to create not only a well-fitting bumper, but also one that flows with the body lines. Our goal with this product was to create what
should have come on your FJ from factory. Our innovation with this product is beyond skin deep though. The 3/4” tow points are just the tip of the iceberg that are our skeleton plates. These plates act as the main point of load transfer for the entire bumper and connect back to the 3/8” mounting plates with a combination of triple pass welds on the front and plug welds on the back. The loading that this design can take far exceeds the stock mounting plates. To control this, we’ve included reinforcement brackets to transfer excess loading back to the swaybar mounting bolts. A lot of companies view these brackets as optional, but we include at the base level to ensure that every customer has the strongest kit available. The wings include a system of lateral and vertical gussets to resist loading in all directions. They are incredibly rigid when experiencing rock strikes. Loading on the face of the wings allows for some flex to let vehicle glance off a rigid body.

Please Note: The full bullbar & headlight hoop design is still under development. All customers that order hoops will have the option to custom design their own set. Pricing reflects a single center hoop or center hoop with headlight hoops. Customer designs that include parts above or beyond these two options will be subject to requote.