Outgear Solutions 2016-2023 Tacoma HC Tube Bumper w/ Single Swingout
Outgear Solutions 2016-2023 Tacoma HC Tube Bumper w/ Single Swingout
Outgear Solutions 2016-2023 Tacoma HC Tube Bumper w/ Single Swingout
Outgear Solutions 2016-2023 Tacoma HC Tube Bumper w/ Single Swingout
Outgear Solutions 2016-2023 Tacoma HC Tube Bumper w/ Single Swingout
Outgear Solutions 2016-2023 Tacoma HC Tube Bumper w/ Single Swingout
Outgear Solutions 2016-2023 Tacoma HC Tube Bumper w/ Single Swingout
Outgear Solutions 2016-2023 Tacoma HC Tube Bumper w/ Single Swingout
Outgear Solutions 2016-2023 Tacoma HC Tube Bumper w/ Single Swingout
Outgear Solutions 2016-2023 Tacoma HC Tube Bumper w/ Single Swingout
Outgear Solutions 2016-2023 Tacoma HC Tube Bumper w/ Single Swingout

Outgear Solutions 2016-2023 Tacoma HC Tube Bumper w/ Single Swingout

Regular price$4,580.00 CAD
/

Finish
Jerry Can Holder
Bedside Protection (Side Hoops)

As of recent, Outgear lead time estimates are 12-14 weeks. However, please be advised there may be a lead time of up to 6 months should there be a manufacturing delay.

If you need this item shipped, please reach out for accurate shipping estimate as it will need to be palletized. 

***High Clearance Rear Tube Bumper Requires Bedsides to be Cut***

Bumper ships as bare steel, powder coat available in Canada.

The Main bumper has the same features as our popular rear tube bumper, only difference will be the upper portion. Here's a quick run down:

Bumper will have - 2" Hitch receiver (Not Rated for Towing, however, we've seen many guys/gals pull watercrafts - dump trailers).

Slotted Tabs for light pods (Baja S2 will fit best), bed reinforcement tabs, and associated hardware.  Also included are 2 Body Filler Panels that goes underneath the Tail light.

The Bumper main plates are .375" Thick where it mounts and then becomes .750" thick to the outside of the round tubes to mount recovery or d rings.

The Round Tubes are all 1.75" DOM .120" thick

The Main Hitch receiver  is  2" ID and .1875" Thick, ties into the main frame plates to make everything structurally sound.

Includes LED Lights for your license plate.

Single Swingout: Swingout comes standard with Tire Mount to house up to 37s and molle panel style across swing out arm. Can mount License plate along the bottom of the arm, or on top.

Construction:

Double Sheared design, with 1 lock position point, Heavy Duty Custom Billet Compression latch, 2x3 rectangular tubing, .120" wall, 1.75" .120" Round DOM Tubing, and Short molle style paneling to house accessories like Tire mount, Camp Table, Hi Life, etc...

Add Ons/Accessories:

Bedside 1/4 Panel Protection (tree savers) $210

Stainless Steel Drop Table - TBA 

Single/Double Jerry Can Holder: $80 / $140 

HiLift Jack Mount: $65

Recommend buying from 3rd party:

Rear Camera Relocation kit

Weight Without Tire / Accessories - 118lbs

Shipping rates are set as a flat rate dependent on weight/size. Some items cannot be shipped to PO boxes. Please be aware of this before submitting your shipping address. 

We try our best to get all items on their way within 2 business days. You will receive a shipping confirmation email once your package has been shipped.  

Read more about our Shipping Policies

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

You may also like