DiamondBack Toyota Tundra SE Tonneau Cover

** We try to keep DiamondBack in stock. However, if this product is out of stock, please expect a 4 to 6 week lead time for this item, once ordered. **

A workhorse so you don’t have to be.

Made from aluminum diamond plate, the DiamondBack SE truck bed cover won't crack like fiberglass or wear out like vinyl. With a 400 lb hauling capacity, you can conquer the outdoors in new ways while keeping your gear dry and secure in the bed of your truck. 

  • Haul up to 400 lbs on top
  • 4 tie-down cleats included
  • Heavy duty diamond plate aluminum 
  • Structural support members

    A thick EPDM compression gasket runs along the perimeter of the cover to create a barrier to water, snow, or ice, keeping your cargo dry.

    • EPDM perimeter gasket
    • Gutter-protected hinge points
    • Side-facing key cylinders
    • Stainless exterior hardware

    Rugged, die-cast zinc lock handles on the access panels of a DiamondBack keep your gear secure by actuating 3/8" deadbolt-style rods directly under the bed rails of your truck.

    • Deadbolt-style lock system
    • Die-cast zinc lock handles
    • 2 key locks
    • Tight and secure fit

    Specs:

    Hauling Capacity: 1,600 lbs

    Dimensions: 
    Cab/Tailgate Panel: 33.375" | ~46 lb
    Center Panel: 12" | ~23 lbs
    Total Cover Weight: ~115 lb

    Construction:
    .100" 3003 alloy aluminum grade
    7 structural studs
    12 tie-down cleats pre-installed
    Neoprene compression gasket
    Stainless steel hinges and external hardware
    3/8" steel lock rods
    Die-cast zinc, keyed lock handles
    5356 alloy TIG welds

    In the Box:
    DiamondBack HD (assembly req’d)
    Gas springs (4)
    Cap clamps (2–4)
    Edge trim pieces (0–4)
    Bulkhead weatherstrip (for most)
    1/8" hex key
    Mounting brackets (0–2)
    Striker brackets (0–2)

    Installation Time: 45 mins

    Removal Time: 10 mins

    $2,699.99

    DiamondBack HD Tonneau Cover - Overland Outfitters DiamondBack HD Tonneau Cover - Vancouver, BC DiamondBack HD Tonneau Cover - CANADA DiamondBack HD Tonneau Cover - Overland Outfitters DiamondBack HD Tonneau Cover - Vancouver, BC DiamondBack HD Tonneau Cover - CANADA DiamondBack HD Tonneau Cover - Overland Outfitters DiamondBack HD Tonneau Cover - Vancouver, BC
    DiamondBack HD Tonneau Cover - Overland Outfitters DiamondBack HD Tonneau Cover - Vancouver, BC DiamondBack HD Tonneau Cover - CANADA DiamondBack HD Tonneau Cover - Overland Outfitters DiamondBack HD Tonneau Cover - Vancouver, BC DiamondBack HD Tonneau Cover - CANADA DiamondBack HD Tonneau Cover - Overland Outfitters DiamondBack HD Tonneau Cover - Vancouver, BC
    $2,699.99
    Year
    Bed Length
    $2,699.99

    ** We try to keep DiamondBack in stock. However, if this product is out of stock, please expect a 4 to 6 week lead time for this item, once ordered. **

    A workhorse so you don’t have to be.

    Made from aluminum diamond plate, the DiamondBack SE truck bed cover won't crack like fiberglass or wear out like vinyl. With a 400 lb hauling capacity, you can conquer the outdoors in new ways while keeping your gear dry and secure in the bed of your truck. 

    • Haul up to 400 lbs on top
    • 4 tie-down cleats included
    • Heavy duty diamond plate aluminum 
    • Structural support members

      A thick EPDM compression gasket runs along the perimeter of the cover to create a barrier to water, snow, or ice, keeping your cargo dry.

      • EPDM perimeter gasket
      • Gutter-protected hinge points
      • Side-facing key cylinders
      • Stainless exterior hardware

      Rugged, die-cast zinc lock handles on the access panels of a DiamondBack keep your gear secure by actuating 3/8" deadbolt-style rods directly under the bed rails of your truck.

      • Deadbolt-style lock system
      • Die-cast zinc lock handles
      • 2 key locks
      • Tight and secure fit

      Specs:

      Hauling Capacity: 1,600 lbs

      Dimensions: 
      Cab/Tailgate Panel: 33.375" | ~46 lb
      Center Panel: 12" | ~23 lbs
      Total Cover Weight: ~115 lb

      Construction:
      .100" 3003 alloy aluminum grade
      7 structural studs
      12 tie-down cleats pre-installed
      Neoprene compression gasket
      Stainless steel hinges and external hardware
      3/8" steel lock rods
      Die-cast zinc, keyed lock handles
      5356 alloy TIG welds

      In the Box:
      DiamondBack HD (assembly req’d)
      Gas springs (4)
      Cap clamps (2–4)
      Edge trim pieces (0–4)
      Bulkhead weatherstrip (for most)
      1/8" hex key
      Mounting brackets (0–2)
      Striker brackets (0–2)

      Installation Time: 45 mins

      Removal Time: 10 mins