Freedom Recovery Gear Recovery & Tree Saver Straps

Freedom Recovery Gear Recovery Straps and Tree Savers are proudly manufactured in Canada from Canadian webbing.


Manufactured and rated by a company that specializes in making straps for the rigging industry, and not he recreation off-road market, you know these straps are going to be up to the task with extra heavy duty reinforced eyes.

With a Minimum Break Strength of 24,000 pound based on destructive testing as assemblies and not a calculation, these straps come with realistic ratings. The Manufactures label specifies all the details you need to know when rigging, if you gear doesn’t come with a label how will you remember what is rated for?

Freedom Recovery Strap is specifically designed to stretch under load for maximum performance, an FRG Recovery Strap is a very effective method of extracting a vehicle meyerd in mud, snow, snow or sand, this is a quick and efficient recovery method, when a second vehicle is present.

We’ve chosen 3” width in high visibility Orange with a double reflective conspicuity thread for nigh visibility at night.

Freedom Recovery Strap in a 3” x 30’ length will stretch approximately 3’ under full load.

This strap size is appropriate for a vehicles 6-8,000 lbs like a 4 Door Jeep or Toyota Tacoma, and even up to ½ ton truck. We recommend about a 3:1 safety factor when sizing you recovery Strap.

Our Tree Savers are available in both 15’, and 8’ in single ply and in an 11’ in a double ply for extra strength. And all our straps come with a Velcro strap.

A nylon Tree saver allows you absorb some of the shock loading that can come from winching.

Please always read the label on your strap for proper ratings.

CAUTION
  • Avoid abrasive surfaces and any sharp edges.
  • Make Sure your Attachment point is capable of holding the load you will place on it.
  • Always Visually Inspect your rope and spliced eyes before use and during attachment to each vehicle.
  • Use shackles of an appropriate strength for the rope and consider switching to soft shackles ( Low Mass ) for increased safety.
  • Test before use. Try light pulls to test attachment before pulling at maximum force.
  • Crawl (tractions extraction), walk (2-3 mph), Run 4-5mph) with no more than 6’ of slack
  • Keep spectators out of the tow zone 1 ½ times farther than the strap can reach.
  • Do not tie a knot. A knot can reduce a rope’s strength by as much as half.*
$149.88

Freedom Recovery Gear Recovery & Tree Saver Straps Freedom Recovery Gear Recovery & Tree Saver Straps Freedom Recovery Gear Recovery & Tree Saver Straps Freedom Recovery Gear Recovery & Tree Saver Straps Freedom Recovery Gear Recovery & Tree Saver Straps Freedom Recovery Gear Recovery & Tree Saver Straps
Freedom Recovery Gear Recovery & Tree Saver Straps Freedom Recovery Gear Recovery & Tree Saver Straps Freedom Recovery Gear Recovery & Tree Saver Straps Freedom Recovery Gear Recovery & Tree Saver Straps Freedom Recovery Gear Recovery & Tree Saver Straps Freedom Recovery Gear Recovery & Tree Saver Straps
$149.88
Size
$149.88

Freedom Recovery Gear Recovery Straps and Tree Savers are proudly manufactured in Canada from Canadian webbing.


Manufactured and rated by a company that specializes in making straps for the rigging industry, and not he recreation off-road market, you know these straps are going to be up to the task with extra heavy duty reinforced eyes.

With a Minimum Break Strength of 24,000 pound based on destructive testing as assemblies and not a calculation, these straps come with realistic ratings. The Manufactures label specifies all the details you need to know when rigging, if you gear doesn’t come with a label how will you remember what is rated for?

Freedom Recovery Strap is specifically designed to stretch under load for maximum performance, an FRG Recovery Strap is a very effective method of extracting a vehicle meyerd in mud, snow, snow or sand, this is a quick and efficient recovery method, when a second vehicle is present.

We’ve chosen 3” width in high visibility Orange with a double reflective conspicuity thread for nigh visibility at night.

Freedom Recovery Strap in a 3” x 30’ length will stretch approximately 3’ under full load.

This strap size is appropriate for a vehicles 6-8,000 lbs like a 4 Door Jeep or Toyota Tacoma, and even up to ½ ton truck. We recommend about a 3:1 safety factor when sizing you recovery Strap.

Our Tree Savers are available in both 15’, and 8’ in single ply and in an 11’ in a double ply for extra strength. And all our straps come with a Velcro strap.

A nylon Tree saver allows you absorb some of the shock loading that can come from winching.

Please always read the label on your strap for proper ratings.

CAUTION
  • Avoid abrasive surfaces and any sharp edges.
  • Make Sure your Attachment point is capable of holding the load you will place on it.
  • Always Visually Inspect your rope and spliced eyes before use and during attachment to each vehicle.
  • Use shackles of an appropriate strength for the rope and consider switching to soft shackles ( Low Mass ) for increased safety.
  • Test before use. Try light pulls to test attachment before pulling at maximum force.
  • Crawl (tractions extraction), walk (2-3 mph), Run 4-5mph) with no more than 6’ of slack
  • Keep spectators out of the tow zone 1 ½ times farther than the strap can reach.
  • Do not tie a knot. A knot can reduce a rope’s strength by as much as half.*