Toyo-Steering 2016-2023 Tacoma Billet Tundra Conversion Rack Kit

Description

The 3rd Gen Tacoma steering rack is a notorious weak point, often succumbing to internal failure or housing flex when paired with 35-inch tires and technical terrain. This Toyo-Steering Billet Tundra Rack Conversion Kit provides a shop-proven solution by allowing you to swap the undersized factory unit for the substantially larger steering rack found in the 2007-2021 Tundra. This kit bridges the gap between mid-size components and full-size strength, ensuring your steering remains precise on forest service roads and high-speed desert sections alike.

Key Features

Full-Size Internals: Utilizes the 2007-2021 Tundra steering rack architecture, which features a larger rack bar and internal components designed for higher load capacities.
Zero-Flex Mounting: Includes 6061-T6 billet aluminum mounting clamps that replace the factory rubber bushings, eliminating rack walk and improving steering response.
Direct Hydraulic Integration: Comes with custom-length high-pressure and return lines to seamlessly connect the Tundra rack to the Tacoma’s power steering pump.
Preserved Geometry: Engineered to maintain proper steering sweep and geometry, preventing unwanted bump steer or binding during suspension cycling.
Trail-Tested Hardware: Supplied with Class 10.9 fasteners to handle the increased torque loads of heavy off-road use.

What’s Included

(2) Billet 6061-T6 Aluminum Rack Clamps
(2) Custom Inner Tie Rods (Designed for Tundra Rack to Tacoma Outer Tie Rod fitment)
(1) Steering Shaft Extension/Adapter
(1) High-Pressure Braided Power Steering Line
(1) Return Power Steering Line
Complete Grade 10.9 Hardware Kit

Pro Tip: This is the ultimate steering upgrade for 3rd Gen Tacoma owners running 35" or 37" tires. While you are performing the swap, we highly recommend inspecting your Suspension bushings and Recovery points, as the increased capability of this rack often encourages more aggressive line choices on the trail.

Specifications

Vehicle Compatibility

3rd Gen Toyota Tacoma (2016-2023)
Technical Specifications
- Fitment: 2016-2023 Toyota Tacoma (3rd Gen)
- The A-arm length "+x.xx" option is only for aftermarket long travel A-arms that extend track width. A 3” lift alone does not require this option. Choose stock length if you’re on factory or mid-travel arms.
- The shortened rack cannot be threaded to M24x1.5 (GX460, 2GFJ, 5G4R) alternative options for tie rods are available.
  The Tundra Outer Tie Rods have a different taper than the stock Tacoma. The stock spindle needs to be reamed out with a 1:10 taper. We can service your spindles or you can purchase a reamed spindle from us.
- Materials: 6061-T6 Billet Aluminum mounts; Braided Stainless Steel lines.
Installation Information
- DIY Difficulty: Advanced
- Note: This installation requires a professional alignment immediately following the swap. Some minor clearancing of the factory crossmember or skid plates may be required depending on your specific setup.
- Looking for a professional install? Our team at the Surrey, BC shop specializes in Toyota steering conversions. Contact the O2 team to book your installation or to confirm your specific sub-model fitment.